CA-1N4-00M1WN-00
FEATURES
- Two Built-in 200mm 5V ARGB Front Fans
- Excellent Cooling Capability with 2-Way Radiator Mounting up to 360mm
- Built-in ARGB Switch Board for Different Lighting Modes
- Gaming Design, Mesh Front Panel
- Riser GPU Support Bracket
- Built-in Power Cover
- 4mm Tempered Glass Side Panel
- Superior Hardware Support
- Supports both ARGB Color Synchronization with ASUS, MSI, GIGABYTE, and ASRock Motherboards, and a RGB color selection button via the I/O Port
- I/O Port Supports Dual USB 3.0
Dual Built-in 200mm 5V ARGB Case Fans
Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
One Click, Switching The Mode
The 5V ARGB fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.
Wave Mode – [Mode 1] RGB wave flows across the entire fan. Color mode cannot be changed while on wave mode.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and ASRock official websites
Angular, Mesh Front Panel
Expanded from the gaming spirit of the classic Overseer RX-I chassis, the special design full mesh panel optimized airflow. With its modern design and high performance, it is the best choice for both gamers and enthusiasts.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Riser GPU Support Bracket
Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Built-in PSU Cover
Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Seamless Tempered Glass Panel
The tempered glass side panel of the Commander C33 TG ARGB is built to be more durable and scratch resistant than older acrylic panels.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Superior Hardware Support
The Commander C33 TG ARGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Excellent Cooling Capability
Optimized for excellent cooling capability with two 200mm 5V ARGB front fans and one 120mm standard rear fan. The case is able to house up to two 200mm, two 140mm or three 120mm front fans, up to two 140mm fans on top to allow users build a complete high-end system.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
Handy I/O Ports
Dual 3.0 USB ports on top-front panel to grant direct access when needed. As well as an ARGB button for controlling 7 lighting modes of ARGB fans.
- The image is for reference only.
- Two 200mm 5V ARGB front fans and one 120mm standard rear fan are included.
SPECIFICATIONS
|
Model
|
Commander C33 TG ARGB
|
|
P/N
|
CA-1N4-00M1WN-00
|
|
Type
|
Middle tower
|
|
Dimension (H x W x D)
|
462 x 233 x 518 mm (18.2 x 9.2 x 20.4 inch)
|
|
Side Panel
|
4mm Tempered Glass x1
|
|
Color
|
Exterior & Interior : Black
|
|
Material
|
SPCC
|
|
Cooling System
|
Rear (exhaust) : 120 x 120 x 25 mm fan
(1000rpm, 16 dBA)
Front (intake) : 200 x 200 x 30 mm ARGB fan x2
(800rpm, 29.2 dBA)
|
|
Drive Bays
-Accessible
-Hidden
|
-
3 x 3.5“ or 2.5” (HDD Bracket); 2 x 2.5” (HDD Bracket)
|
|
Expansion Slots
|
7 + 2
|
|
Motherboards
|
6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)
|
|
I/O Port
|
USB 3.0 x 2, HD Audio x 1, RGB Switch x 1
|
|
PSU
|
Standard PS2 PSU (optional)
|
|
Fan Support
|
Front: 3 x 120mm, 2 x 140mm, 2 x 200mm
Top: 2 x 120mm, 2 x 140mm
Rear: 1 x 120mm
|
|
Radiator Support
|
Front: 1 x 360mm, 1 x 280mm
Top: 1 x 240mm, 1 x 280mm
Rear: 1 x 120mm
|
|
Clearance
|
CPU cooler height limitation: 180mm
PSU length limitation: 200mm
VGA length limitation: 310mm(With reservoir) 410mm(Without reservoir)
VGA width limitation(Vertically): 45mm
VGA height limitation: 110mm
RAM height limitation: 35mm (With 140mm radiator series) 50mm (With 120mm radiator series)
|
|
Warranty
|
3 Years
|
|
Note
|
***Features, Price and Specifications are subject to change without notice.
|
