Overview
X70 GEN3X4 NVMe
addgame X70 is addlink’s gaming series SSD. The X70 is covered by a slim and a eye-catching heatsink which reduces the SSD’s temperatures for excellent cooling. With 3D NAND, a DRAM Cache Buffer and LDPC ECC technologies, it maintains extremely high speeds and data integrity during even the most intense gaming, redering, overclocking, and other high demand applications.
Lightening speed with 3D NAND
addlink's X70 M.2 PCIe follows NVMe and utilizes the PCIe Gen3 x 4 interface, meaning four lanes are used for transmitting and receiving data simultaneously, resulting in compelling performance of Read/Write up to 3400/2000MB/s*.and random Read/Write 350K/500K IOPS.
Metal heatsink with superior cooling
addlink X70 consists of a PCB, and metal with diamond-cut heatsink. Combined, heatsink can drop typical temps effectively compared to bare M.2 SSDs, with some scenarios seeing even larger heat reduction.
RGB lighting effect
Don't need extra cables or special mounting strategies X70 has built-in water flowing lighting with RAINBOW mixed color effect*. The colorful lighting change can be presented at once. Then you are able to enjoy the fun of RAINBOW lighting effect immediately and possess the unique RGB high speed M.2 solid state drive. For ease of use, the X70 is compatible with most motherboards from all the major brands.
* Note: addlink X70 lighting control support through the listed third-party software may vary between motherboard models. Please make sure the software version is up to date.
Better endurance, aim at high-end applications
Experience the unprecedented performance for heavy workloads and engineering applications with the highly reliable X70 SSD, with high endurance up to 700TBW. The X70 boasts a cutting-edge 3D NAND-based architecture that delivers the next-generation performance in a compact M.2 form factor.
Includes SSD ToolBox Software
addlink M.2 PCIe SSD Toolbox is a software offer an easy way to analyze and manage your drive. With addlink M.2 SSD Toolbox you will be able to:
- View drive information exp: general SPEC, firmware version
- Scan and diagnostic drive Health
- Check drive identify device command
- Monitor SMART Status
- Run secure erase
Specifications
| Capacity |
512GB |
| NAND Flash |
3D TLC |
| Dimensions |
80(L)x20(W)x9.1(H) mm, 20g |
| Interface |
NVMe GEN3x4 1.3 |
| Form Factor |
M.2 2280 |
| Seq. Read/Write (MB/s) |
3400/2000
|
| 4K Random Read/Write (IOPS) |
350K/500K
|
| Operating Temp. |
0°C ~ 70°C |
| Storage Temp. |
-40°C ~ 85°C |
| Power Consumption(R/W) |
4.5W/5W |
| MTBF |
1.8 Million Hours |
| Endurace |
700 TBW |
| Support Functions |
TRIMM DEVSLP, Garbage Collection, ECC, S.M.A.R.T, SLC Caching, Wear Leveling, Bad Block management, Over-Provision, RAID Protection |
| Operating System |
Microsoft Windows 7 (additional driver required) Microsoft Windows 8 (additional driver required) Microsoft Windows 10, Linux Kernel 2.6.31 or later |
| Warranty |
5 Years or 700 TBW |
| Note |
*** Features, Price, Specifications are subject to change without notice. |
