Features:

• Ruggedized construction with integrated carry handles
• 2x RS200 and 1x RS120 PWM fans pre-installed
• Daisy-chainable 4-pin PWM fan connectors
• InfiniRail Fan Mounting System delivers unmatched flexibility
• 3D Y-pattern front and top panels enhance airflow
• Dual 360mm radiator support with three mounting locations
• RapidRoute 2.0 pegboard motherboard tray for clean cable management
• Reverse connector motherboard support
• Easily accessible USB front I/O panel
• Built-in GPU Anti-sag Stabilization Arm

CORSAIR WARTHOG RS is a ruggedized, modular mid-tower case for PC builders who demand great looks, incredible flexibility, strong airflow, and long-lasting durability.Thick steel construction, integrated carry handles, and slide-on side panels deliver a tough, purposeful feel. High-airflow 3D Y-pattern front and top panels are paired with 360mm radiator support for strong thermal performance. Cooling comes pre-configured with two RS200 PWM fans as front intakes and an RS120 PWM fan as a rear exhaust. WARTHOG is an easy case to build in withthe InfiniRail fan mounting system, reverse connector motherboard support, RapidRoute 2.0 cable management, and an included GPU Anti-sag Stabilization Arm.

Built to Last

The ruggedized aesthetic is not just for looks. The chassis combines thick steel, rigid construction, and functional venting for excellent airflow.

RS PWM Fans

Dual RS200 high performance 200mm fans are pre-installed at the front of the case as intakes, with a RS120 fan at the rear for exhaust. The fans support daisy chainable connections and Zero RPM mode for near silent operation at low loads. Each fan is controllable via a standard motherboard 4-pin PWM connector, or a fan controller such as the CORSAIR COMMANDER DUO.

Integrated Carry Handles

Top-mounted handles are structurally integrated into the chassis, allowing the case to be lifted and carried with confidence, without concern over durability.

Rear I/O Lighting

Rear lighting illuminates the back of the system, making it easier to connect cables and components without guesswork.

Compact PSU Shroud

The compact PSU shroud preserves space for advanced cooling configurations. It supports a 120mm fan mounted on the case floor directly in front of the shroud, increasing airflow to the GPU area. The ventilated top surface can further improve airflow when paired with a 120mm fan

Slide-on Side Panels

Rugged side panels slide onto fixed securing pegs rather than using tilt and clip mechanisms found on typical cases, improving durability and ease of installation.

3D Y-Pattern Airflow Panel

Optimized for high airflow, the front and top panels use a 3D Y-pattern that increases airflow by 12.7% compared to standard flat cutouts, creating a low-obstruction path for cool air.

Dual 360mm Radiator Support

Keep cool with support for 360mm radiators in three locations: front, roof, and side. Mount up to 13x 120mm fans simultaneously to maintain strong, efficient airflow.

CORSAIR InfiniRail Fan Mounting System 

A steel multi-point mounting system offers exceptional flexibility in front and roof fan configuration. Simply slide the rail to mount fans up to 200mm in the front and up to 140mm in the roof, allowing precise placement for airflow without fixed mounting constraints

Reverse Connection Motherboard Support

Validated for ASUS BTF, MSI Project Zero, and GIGABYTE Project Stealth motherboards, with extensive connector cutouts and tie downs to keep cables tidy even where they are not visible.

Versatile Connectivity

Front I/O includes two easily accessible USB 3.2 Gen 1 Type-A ports and one USB 3.2 Gen 2x2 Type-C port for charging and connectivity.

Flexible Storage Options 

The included drive tray supports one 3.5" hard drive or two 2.5" SSDs. The tray can also be removed entirely to free up space for cable routing.

Solid GPU Support 

Today’s graphics cards are larger and heavier than ever, which is why this case includes a GPU Anti-sag Stabilization Arm to keep your graphics card properly supported.

RapidRoute 2.0 Cable Management

A pegboard style motherboard tray provides customizable mounting points for tie downs and buckles. Includes six cinching straps and two wire loom pairs to secure excess cable length for a clean interior, with the option to 3D print additional accessories. Increased spacing behind the motherboard tray further improves cable management.

FRAME Modular Case System

Select components of the FRAME case are user-replaceable to fit your need, including the motherboard tray and PSU shroud

Cooling Layout:

• Front: 3x 120mm, 2x 140mm, 2x 200mm (2x RS200mm Included)
• Top: 3x 120mm, 2x 140mm
• Side: 3x 120mm, 2x 140mm
• PSU Shroud: 2x 120mm
• Bottom: 1x 120mm
• Rear: 1x 120mm, 1x 140mm (1x RS120 Fans Included)

Radiator Compatibility:

• Front: 360mm, 280mm, 240mm
• Top: 360mm, 280mm, 240mm
• Side: 360mm, 280mm, 240mm
• PSU Shroud: None
• Bottom: None
• Rear: 120mm, 140mm

Clearances:

• PSU: 200mm
• CPU Cooler: 190mm
• GPU: 405mm (w/Fan)