EK-Loop 12mm ID x 16mm OD 6Pcs Pre-Bent 90°- Hard Acrylic Tube (800mm)

EK-Loop 12mm ID x 16mm OD 6Pcs Pre-Bent 90°- Hard Acrylic Tube (800mm)

₹8,220 (51% off )
Save ₹8,679 MSRP ₹16,899 (Inc of all taxes)
Product Model: 3831109826065
Availability: In Stock


Features

EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.

It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.

The package contains 6 pieces of tubing only. Please purchase HDC or HDP fittings separately.

We recommend wetting the gasket (O-ring) using drops of water before installing the solid tube for easier installation.

 

Specifications:

Technical specifications
  • Inner diameter: 12 mm
  • Outer diameter: 16 mm
  • Total length: 800 mm
  • Bend Angle: 90°
  • Bend Radius: R30
  • Length per axis: 550x250mm
Material / Design / Color option Extruded acrylic
Warranty 2 Years
Note *** Features, Specifications, Price are subject to change without notice.

 

PLEASE NOTE:

  • We recommend wetting the gasket (O-ring) using drops of water before installing the solid tube for easier installation.

Ask a question

Note: HTML is not translated!

Write a review

    Bad           Good

EK-Loop 12mm ID x 16mm OD 6Pcs Pre-Bent 90°- Hard Acrylic Tube (800mm)
EK-Loop 12mm ID x 16mm OD 6Pcs Pre-Bent 90°- Hard Acrylic Tu....
₹8,220 (51% off )