Using metric size fittings? The Bykski Acrylic tubing is crystal clear and easy to work with.
Key Features
- Easy to Cut
- High Transparency
- Easy to Bend
INSTALLATION INSTRUCTIONS
Please Note: A Bending Insert Is Meant To Have A Tight Fit. If It Is Loose, The Rigid Tube Will Collapse, Kink, Form Air Pockets And Flat Spots When Heated. The Tighter The Fit, The Better The Result. This Process Requires Patience, But Will Become Easier The More You Practice.
The Bending Insert Requires Some Stretching And Lubricating To Get It In The Rigid Tube. Steps To Success Are Below:
1. Stretch The Bending Insert. Remove Any Excess That Isn’t Stretched.
2. Ream The Rigid Tube With An Rfb For Best Results, (Or A Hand Reamer If That's All You Have). This Will Ensure A Clean Opening For Easier Insertion.
3. Lubricate By Applying Several Drops Of Dish Soap, Olive Oil, Or Tube Lube On The Bending Insert Itself And Then Place Several More Drops Into The Rigid Tube.
4. Work The Bending Insert Into The Rigid Tube. The More You Use The Insert, The Easier This Process Will Become.
Specifications
Inner Diameter (ID) |
12mm |
Outer Diameter (OD) |
16mm |
Wall Thickness |
2mm |
Length |
1meter |
Fittings |
16mm OD Rigid |
Important Info |
With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid PETG Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.
Not responsible for any damage caused by or when using this product. Please use at your own risk.
|
Note |
*** Features, Price, Specifications are subject to change without notice |