Out Of Stock Apc 1.5KVA 230V
FEATURES
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.
Power-saving outletsAutomatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
USB connectivityProvides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Pro Features & Benefits
Protection
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Availability
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Cold-start capable
Provides temporary battery power when the utility power is out.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Marketing Features
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.

Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Manageability
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Disconnected battery notification
Warns when a battery is not available to provide backup power.

Serviceability
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Product Distribution
India
Tech Specs
Detailed Spec.

Output

Output power capacity

865Watts / 1.5 kVA

Max Configurable Power (Watts)

865Watts / 1.5 kVA

Nominal Output Voltage

230V

Efficiency at Full Load

85.0 %

Output Frequency (sync to mains)

50/60 Hz +/-1 Hz

Topology

Line Interactive

Waveform type

Stepped approximation to a sinewave

Output Connections

(2) India 3-pin 6A (selector_surgetitle)

(4) India 3-pin 6A (Battery Backup)

Transfer Time

6ms typical : 10ms maximum

Input

Nominal Input Voltage

230V

Input frequency

50/60 Hz +/- 3 Hz (auto sensing)

Input Connections

India 3-pin 16A

Cord Length

1.52meters

Input voltage range for main operations

160 - 280V

Number of Power Cords

1

Efficiency at Full Load

85.0 %

Batteries & Runtime

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time

7.2hour(s)

Expected Battery Life (years)

2 – 4

Replacement battery cartridge note

9Ah x 2 internal batteries

RBC Quantity

1

Extended Run Options

APC-Power-Saving-Back-UPS-Pro-1500-230V-India

Communications & Management

Interface Port(s)

USB

Control panel

Multi-function LCD status and control console

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating

680Joules

Data Line Protection

Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)

Physical

Maximum Height

301mm , 30.1cm

Maximum Width

114mm , 11.4cm

Maximum Depth

382mm , 38.2cm

Net Weight

11.76kg

Shipping weight

13.19kg

Shipping Height

381mm , 38.1cm

Shipping Width

229mm , 22.9cm

Shipping Depth

483mm , 48.3cm

Color

Black

Master Carton Units

2.0

Master Carton Weight

28.14

SCC Codes

1073130426879 3

Environmental

Operating Environment

0 - 40 °C

Operating Relative Humidity

0 - 95 %

Operating Elevation

0-3000meters

Storage Temperature

-15 - 45 °C

Storage Relative Humidity

0 - 95 %

Storage Elevation

0-15000meters

Audible noise at 1 meter from surface of unit

45.0dBA



Warranty2 Years
Note***

Features, Price and Specifications are subject to change without notice.***

Write a review

Note: HTML is not translated!
    Bad           Good

Ask a question

Note: HTML is not translated!

Apc 1.5KVA 230V

  • Brand: APC
  • Product Code: BR1500G-IN
  • Availability: Out Of Stock
  • Rs.14,000

Complement goods

APC 1KVA 230V Back-UPS With LCD (BR1000G)

APC 1KVA 230V Back-UPS With LCD (BR1000G)

FEATURESAdjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applic..

Rs.8,600

APC 600VA 230V Back-UPS (BX600C-IN)

APC 600VA 230V Back-UPS (BX600C-IN)

FEATURESAudible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic batt..

Rs.2,670

Track Order