Antec Performance 1 FT ARGB is a full tower E-ATX PC Cabinet. Both side panels adopt tempered glass for better PC showcase visual effects. The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Features:
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUinity software must be installed.
ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer.
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.
4mm tempered glass & perforated solid steel
Left panel adopts tempered glass for better PC showcase visual effects. Right solid panel is bottom-perforated to enhance heat dissipation and ventilation.
Cable Management on Point
Spacious cable management for efficient wire organization.
There are ten sets of velcro straps for easy cable management.
- Three sets of velcro straps for fan & I/O cable routing.
- Five velcro straps for hardware and power supply cables.
- Two velcro straps at the rear for rear I/O cable routing.
Exquisite craftsmanship
Minimal clearance between fan frame and blades, achieving maximum operational efficiency.
Vibration-Absorbing & Anti-Noise Pads
Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path for GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.
- Top: Magnetic dust filter
- Front: Magnetic & clip-on dust filter
- Bottom: Full-sized pull-out dust filter
- Side: Magnetic dust filter
Supports RTX 40 Series Graphics Cards
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
Best Cooling Design
- Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
- Supports 360mm radiators at the front and top simultaneously.
- Up to 10 fans simultaneously.
Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
Specification:
| Model |
Performance 1 FT ARGB |
| Color |
Black |
| Dimensions |
522 x 230 x 522 mm (DWH) |
| Form Factor |
Full Tower |
| Materials |
Steel + Plastic + Glass |
| Mainboard Support |
E-ATX, ATX, Micro-ATX, ITX |
| Front Access & Controls |
Power, Reset , USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, Temp. Display Switch x 1 |
| Side Panel |
4mm Tempered Glass(Both Sides) |
| Drive Bays |
| Expansion Slots |
8 |
| 3.5" / 2.5" |
2/2 |
| 2.5" |
3 |
| Fan Support |
| Front |
3 x 120mm / 3 X 140mm |
| Top |
3 x 120mm / 3 x 140mm |
| Power Supply Shroud |
3 x 120mm |
| Rear |
1 x 120mm |
| Included Fan(s) |
3 x 140 x 30mm PWM fans in front + 1 x 120 x 30mm PWM fan in rear
Pre-installed Storm T3 PWM fan specs vary from the retail version |
| Radiator Support |
| Front |
120 / 140 / 240 / 280 / 360 / 420mm |
| Top |
120 / 140 / 240 / 280 / 360mm |
| Rear |
120mm |
| Clearance |
| Max GPU Length |
≤ 400mm |
| Max CPU Cooler Height |
≤ 175mm |
| Max PSU Length |
(Include cable) ≤ 245mm(with HDD)
(Include cable) ≤ 440mm(without HDD) |
| Miscellaneous |
| Dust Filter |
Front / Top / Bottom / Right Side |
| Net Weight |
13.04Kg |
| Gross Weight |
15.26Kg |
| Warranty |
2 Years |
| Note |
*** Features, Price, Specifications are subject to change without notice. |
